12V Linear Actuators


	ServoCity- Motors & Accessories- 12V Linear Actuators-


	12V Linear Actuators

115 lbs.

0.50” inches per sec.

Move up to 115 lbs for under $100! Introducing our all new Heavy Duty 12V Linear Actuators. Now you have the power for those extra large projects. Built in potentiometer can be easily accessed for position feedback but is not necessary for operation. Limit switches at both ends prevent over-run. All aluminum construction with metal drive gears ensure tremendous durability and reliability. We offer them in six stroke lengths from 2 inches up to 12 inches. Extension shaft is .785” diameter. Mounting points are 1/4” diameter and bolt up directly to our optional mounting brackets.




		Detailed Specifications
		Operating Voltage: 6.0-12 Volts DC Operating Temperature Range: -20 to +60 Degree C Operating Speed (12V): 0.50” second at max load Dynamic Thrust (12V): 115 lbs. Thrust Static Load: 500 lbs. Current Drain (12V): 500mah no load operating Motor Type: 3 Pole Ferrite Potentiometer: I0K Gear Type: 4 Metal Gears Connector Wire Length: 24" Recommended Fuse: 10amp inline IP Grade: 2IP 63-total dust protection, water resistant


	Using our mounting brackets will allow you to easily and quickly attach the actuator to various contact points as shown to the left.


	Mounting Bracket

Price:

$12.99 each

Part:

HDM250

Status:

Qty:


	Feedback Wiring Schematic: White - 10K Potentiometer Reference Yellow - 10K Potentiometer Reference Blue - 10K Potentiometer Wiper (Position Signal)


	DPDT 20A Actuator Switch

Price:

$9.99

Part:

275-709

Status:

Qty:

All you need to do in order to get your actuator up and running is apply 6-12VDC to the positive (red) and negative (black) wires. You do not need to do anything with the potentiometer wires (Blue, Yellow, White). The potentiometer wires are only needed if you are building a system which requires you to know the exact position of the actuator piston. For normal operation, we recommend purchasing the switch above and wiring the switch according to the schematic.

Stroke

Part #

Weight

Price

Status

Qty

Buy

2”

HDA2.00

37.9 oz.

$99.99

4”

HDA4.00

39.8 oz.

$99.99

6”

HDA6.00

42.8 oz.

$99.99

8”

HDA8.00

44.8 oz.

$99.99

10”

HDA10.00

47.2 oz.

$99.99

12”

HDA12.00

49.8 oz.

$99.99


	Copyright 1999-2008 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.