Auxiliary Joystick Controller

The 2 channel Auxiliary Joystick Controller is to be used in conjunction with the Joystick Controller (main controller) that comes with our open loop pan and tilt systems. The auxiliary controller simply plugs into the main controller via the provided 3’ CAT6 cable and allows the user to proportionally control 2 additional gearmotors. Just as the main controller, the Auxiliary Joystick Controller provides fully proportional control of the speed and direction of the gearmotors being operated. The maximum speed of each axis can be limited by the min/max knobs for ultra slow shots. The additional gearmotors (not included) are able to be plugged in at the base of the pan and tilt head and allow you to control functions such as roll, zoom, focus, iris or dolly movements. You can even use the Auxiliary Joystick Controller to operate a second pan and tilt head! The 1” bar clamp found on the back of the Auxiliary Joystick Controller makes it easy to install onto a jib crane. 

This Auxiliary controller is to be used in conjunction with the Joystick Controller (main controller) that comes with our open loop pan and tilt systems. You must have the main controller to utilize the Auxiliary Controller. The Auxiliary Controller will not work as a stand alone unit.

Includes:

• Auxiliary Controller
• 3’ CAT6 Cable

This Auxiliary Controller will work with the following pan and tilt systems:

• MPT1100-SS
• PT-2100
• PT-2100-XL
• MPT2100-DS
• MPT2100-DS-XL