D777MG Servo
Hitec's low profile D777MG servo has evolved directly from their popular metal gear HS-7775MG and HS-8775MG. With 32-bit high resolution, ultra-response technology and wide voltage operation, the D777MG is the perfect solution for hobbyists requiring a low profile servo with an efficient coreless metal brushed motor.
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
90°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
144°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
144°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
118°
Your average transmitter and receiver will output a relativly narrow PWM signal range.
Radio System + Travel Tuner:
190°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
190°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Tech Tips
Specs
| Output Shaft Style | H25T Spline |
|---|---|
| Voltage Range | 4.8 V - 6.0 V |
| No-Load Speed (4.8V) | 0.09 sec/60° |
| No-Load Speed (6.0V) | 0.07 sec/60° |
| Stall Torque (4.8V) | 72 oz-in. (5.18 kg.cm) |
| Stall Torque (6.0V) | 90 oz-in. (6.48 kg.cm) |
| Max PWM Signal Range | 760-2200 μsec |
| Travel per µs (Stock) | 0.100°/μsec |
| Pulse Amplitude | 3-5 V |
| Operating Temperature | -20°C to +60°C |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 1 µs |
| Motor Type | Coreless Metal Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Dual Ball Bearing |
| Gear Material | MP 1st Gear & 3 Metal Gears |
| Wire Length | 8" (203.2 mm) |
| Weight | 1.80 oz (45.0 g) |
| Max Rotation (Stock) | 144° |
| Max Rotation (Reprogrammed) | 190° |
| Travel per µs (Reprogrammed) | 0.132°/µsec |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the D777MG Servo.
