DISCONTINUED This product has been discontinued.
This product has been discontinued. It has been replaced by the 637230-2122.
Introducing the 2020-2021 FTC Competition Kit! This compilation includes 1,830 of the finest FTC approved parts to set your team up for a successful year of competing. Check out the highlights!
Structure:
You’ll find a vast variety of channel-based building components, as well as extrusion-based build components for those of you who like to stray from the beaten path. The array of parts range in size so you can beef up your chassis where necessary, while saving ounces where it counts!
Servos:
Four goBILDA® servos (2000-0025-0002) are included in this season’s kit. They boast steel gears to better handle the abuse we know you’re able to dish out! These servos can rotate up to 300 degrees in feedback mode, or, can be put into continuous mode for unlimited rotation! We’ve included the programmer for you to pick the mode that best suits your needs.
Gear Motors:
Four goBILDA 5202 Series Yellow Jacket Gear Motors! We chose the 19:1 ratio as the go-to because they're excellent for most chassis designs, but they have plenty of torque to be able to be utilized in lifts and other areas of your robot. The M4 mounting holes on the face align with the included 1206-0016-0004 adaptor to convert to the Actobotics mounting pattern or you can clamp around the motor with the included 32mm clamping mounts.
Drive:
Barrel Hubs, ¼" D-shafting, Servo Gears, Pinion Gears, Spur Gears, Sprockets and Chain, HD Wheels, Omni Wheels. That’ll do pig, that’ll do.
Wiring:
With REV Robotics® being the sole option on the controller, we’ve included encoder cables and motor cables for completely plug-n-play wiring.
Hardware:
While hardware often times goes unnoticed, just know we’ve put plenty in the kit. Hex keys have been provided for every bit of hardware that you’ll find in the kit!
For your convenience, we accept school purchase orders from approved applicants. Be sure to apply for your team discount in order to receive this already discounted kit, for an additional 25% off!
SKU | Qty | Description |
---|---|---|
3101-0012-0060 | 1 | 12V NiMH / NiCad Smart Battery Charger with Tamiya connector |
14-0014 | 1 | Matrix 12V 3000mAh NiMH Battery |
3801-0203-0060 | 1 | Battery Cable (Female XT30 to Male Tamiya Adaptor) |
2000-0025-0002 | 4 | 2000 Series Dual Mode Servo (25-2) |
3102-0001-0001 | 1 | 3102 Series Dual Mode Servo Programmer (1-1) |
3802-1718-0300 | 2 | 12" Hitec Super-Duty Extension |
3802-1718-0600 | 2 | 24" Hitec Super-Duty Extension |
605041 | 1 | Battery Mount Kit |
5202-0002-0019 | 4 | 5202 Series Yellow Jacket Planetary Gear Motor (19.2:1 Ratio, 312 RPM, 3.3 - 5V Encoder) |
3801-0613-0100 | 4 | Motor Cable (2-Pin JST VH to 3.5 mm Female Bullet Adaptor) |
3801-0709-0600 | 4 | Encoder Cable (JST XH Series to JST PH Series Adaptor) |
SKU | Qty | Description |
---|---|---|
585440 | 6 | 1.50" Aluminum Channel |
585442 | 2 | 3.00" Aluminum Channel |
585444 | 2 | 4.50" Aluminum Channel |
585446 | 2 | 6.00" Aluminum Channel |
585450 | 2 | 9.00" Aluminum Channel |
585452 | 2 | 10.50" Aluminum Channel |
585454 | 2 | 12.00" Aluminum Channel |
585456 | 2 | 13.50" Aluminum Channel |
585460 | 2 | 16.50" Aluminum Channel |
565042 | 2 | 10.50" X-Rail |
565046 | 2 | 12.00" X-Rail |
565030 | 2 | 6.00" X-Rail |
565018 | 2 | 3.00" X-Rail |
585075 | 2 | X-Rail T-Bracket |
585076 | 2 | X-Rail L-Bracket |
585074 | 2 | Raised Perpendicular X-Rail Mount |
585070 | 2 | 3/8" x 3/8" 90 Degree X-Rail Bracket |
585468 | 2 | Flat Single Pattern Bracket |
585720 | 2 | 3" x 1.5" Pattern Plate (3 hole) |
585722 | 2 | 4.5" x 1.5" Pattern Plate (5 hole) |
585728 | 2 | 12" x 1.5" Pattern Plate (15 hole) |
585586 | 2 | Flat 0.770" Pattern Bracket C |
585588 | 2 | Flat 0.770" Bracket D |
585592 | 2 | Flat 0.770" Pattern Bracket F |
585002 | 1 | 4.5" x 6" Aluminum Pattern Plate |
585004 | 1 | 4.5" x 12" Aluminum Pattern Plate |
585006 | 1 | 9" x 12" Aluminum Pattern Plate |
585376 | 2 | 0.375" Mini Channel |
585380 | 2 | 1.54" Mini Channel |
585392 | 2 | 6.16" Mini Channel |
585399 | 2 | 12.32" Mini Channel |
585404 | 2 | 1.54" (5 hole) Aluminum Beam |
585416 | 2 | 6.16" (17 hole) Aluminum Beam |
585423 | 2 | 12.32" (33 hole) Aluminum Beam |
585628 | 2 | 90° Flat Pattern Bracket A |
585600 | 4 | Beam Attachment Block |
585470 | 8 | 90° Dual Side Mount A |
585644 | 1 | Actobotics Hinge |
545372 | 4 | 0.125" Hub Spacer |
545440 | 4 | 0.770" - 0.770" Pattern Adaptor |
545384 | 4 | 0.500" Hub Spacer |
555176 | 2 | 32mm Bore Bottom Tapped Clamping Mount |
575124 | 2 | Standard Servo Plate B |
575112 | 2 | Standard Servo Plate A |
585424 | 6 | 90° Single Angle Pattern Bracket |
545360 | 6 | Side Tapped Pattern Mount C |
545420 | 2 | Side Tapped Pattern Mount A |
545400 | 2 | 90° 0.770" Pattern Mount |
545532 | 2 | Channel Connector Plate |
1206-0016-0004 | 2 | 1206 Series Pattern Adaptor (16-4) |
SKU | Qty | Description |
---|---|---|
545692 | 2 | 1/4" D-Bore Barrel Hub |
545698 | 2 | 6mm D-Bore Barrel Hub |
545618 | 2 | 6mm Bore Clamping D-Hub (Tapped), 0.770" Pattern |
545619 | 6 | 0.250" Bore Clamping D-Hub (Tapped), 0.770" Pattern |
625302 | 4 | 0.250" (1/4) Steel Set Screw Collar |
625102 | 4 | 1/4" Flanged Aluminum Clamp Collar |
615242 | 1 | 16T, 0.250" (1/4) Bore 32P Shaft Mount Pinion Gear |
615250 | 2 | 24T, 0.250" (1/4) Bore 32P Shaft Mount Pinion Gear |
615258 | 1 | 16T, 6mm Bore, 32P Shaft Mount Pinion Gear |
615266 | 1 | 24T, 6mm Bore, 32P Shaft Mount Pinion Gear |
615198 | 2 | 32 Pitch, 72 Tooth (.50" Bore) Aluminum Hub Gear |
615206 | 1 | 32 Pitch, 80 Tooth (.50" Bore) Aluminum Hub Gear |
595410 | 4 | 4" Heavy Duty Wheel |
595671 | 4 | 4" Omni Wheel |
535198 | 16 | 1/4" ID x 1/2" OD Flanged Ball Bearing |
535118 | 1 | 1/2" Bore, Face Thru-Hole Pillow Block |
633104 | 24 | 0.250" Shafting and Tubing Spacer |
625100 | 2 | 1/4" - 6mm HD Shaft Coupler |
634064 | 4 | 0.250" x 1.50" Stainless Steel D-Shafting |
634068 | 4 | 0.250" x 2.00" Stainless Steel D-Shafting |
634074 | 4 | 0.250" x 2.50" Stainless Steel D-Shafting |
634078 | 4 | 0.250" x 3.00" Stainless Steel D-Shafting |
634094 | 1 | 0.250" x 12.00" Stainless Steel D-Shafting |
525125 | 2 | 25T Lightweight Hub Horn |
525150 | 1 | 0.250" Bore Clamping Servo Shaft Coupler (25T Broach) |
525123 | 1 | 25 Tooth Servo Shaft Hub (0.500") |
RHS-250-24 | 4 | 24 Tooth 0.770" Acetyl Hub Mount Sprocket 0.250" Pitch |
RHS-250-32 | 4 | 32 Tooth 0.770" Acetyl Hub Mount Sprocket 0.250" Pitch |
615146 | 1 | 0.250" Chain (5ft) and Connecting Links |
585590 | 1 | 0.1" Drop-Center Bearing Plate (4 pack) |
SKU | Qty | Description |
---|---|---|
2909-0101-0100 | 100 | 4.00" Length Nylon Zip Tie |
7122A16 | 1 | 3/32" SAE Hex Key |
57185A44 | 1 | 7/64" Extra Long SAE Hex Key |
7122A17 | 1 | 7/64" SAE Hex Key |
7289A14 | 1 | 3mm Metric Hex Key |
633136 | 4 | 1.32" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) |
633140 | 4 | 1.50" Length, 1/4" OD Round Aluminum Standoff (6-32 Thread) |
632106 | 200 | 6-32 x 0.250" Zinc-Plated Socket Head Machine Screw |
632108 | 200 | 6-32 x 0.3125" Zinc-Plated Socket Head Machine Screw |
632110 | 100 | 6-32 x 0.375" Zinc-Plated Socket Head Machine Screw |
632112 | 25 | 6-32 x 0.4375" Zinc-Plated Socket Head Machine Screw |
632114 | 25 | 6-32 x 0.500" Zinc-Plated Socket Head Machine Screw |
632116 | 25 | 6-32 x 0.5625" Zinc-Plated Socket Head Machine Screw |
632118 | 25 | 6-32 x 0.625" Zinc-Plated Socket Head Machine Screw |
632120 | 25 | 6-32 x 0.750" Zinc-Plated Socket Head Machine Screw |
632124 | 25 | 6-32 x 1.00" Zinc-Plated Socket Head Machine Screw |
632128 | 25 | 6-32 x 1.25" Zinc-Plated Socket Head Machine Screw |
632142 | 100 | 6-32 Nylock Nuts Pack |
632144 | 100 | #6 Undersized Washer |
98847A007 | 1 | 6-32 Stainless Steel Threaded Rod |
585433 | 4 | 6-32 x 0.250" (1/4) Heavy Duty Linkage |
585474 | 24 | Single Screw Plate |
585756 | 4 | X-Rail Nut |
636075 | 8 | Plastic Locking Grommet |