HS-5496MH Servo
Based on the popular HS-5485HB, the HS-5496MH is the perfect match for match for sport airplanes up to 25% scale as well as sport cars and trucks. With 7.4 volt, 2-cell LiPo battery capability, The HS-5496MH delivers the power you need at a price you can feel good about!
How Far Will This Servo Rotate?
The answer to this question is partially dependent on what you are using to control the servo.
Click for a quick video explanation.
Stock:
With an Average Radio System:
70°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
117°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
117°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Reprogrammed:
Whether you purchase the reprogrammed option or get a servo programmer and do it yourself, a reprogrammed version of this servo will be able to achieve greater travel than it can in stock form.
With an Average Radio System:
119°
Your average transmitter and receiver will output a relatively narrow PWM signal range.
Radio System + Travel Tuner:
200°
Adding a Servo Travel Tuner to your radio system setup will allow you to achieve wide PWM signal ranges.
Wide Signal Controllers:
200°
Controllers such as the Servo Commander, Arduinos, and Raspberry Pi servo hats can usually send a wide signal.
Programmable Features
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
Tech Tips
Specs
| Output Shaft Style | C24T Spline |
|---|---|
| Voltage Range | 6.0V - 7.4V |
| No-Load Speed (7.4V) | 0.15sec/60° |
| No-Load Speed (6.0V) | 0.17sec/60° |
| Stall Torque (6.0V) | 88.8 oz-in (6.4 kg.cm) |
| Stall Torque (7.4V) | 104.2 oz-in (7.5 kg.cm) |
| Max PWM Signal Range | 750-2250μsec |
| Travel per µs (Stock) | .078°/μsec |
| Travel per µs (Reprogrammed) | .133°/μsec |
| Max Rotation (Stock) | 117° |
| Max Rotation (Reprogrammed) | 200° |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (6.0V) | 10mA |
| Current Drain - idle (7.4V) | 12mA |
| Current Drain - no-load (6V) | 170mA |
| Current Drain - no-load (7.4V) | 190mA |
| Current Drain - stall (6V) | 1200mA |
| Current Drain - stall (7.4V) | 1400mA |
| Continuous Rotation Modifiable | Yes |
| Direction w/ Increasing PWM Signal | Clockwise |
| Deadband Width | 4µs |
| Motor Type | Cored Metal Brush |
| Feedback Style | 5KΩ Potentiometer |
| Output Shaft Support | Dual Ball Bearings |
| Gear Material | 1 Resin, 3 Metal Gears |
| Wire Length | 11.81" (300mm) |
| Weight | 1.84oz (52g) |
| Wire Gauge | 25AWG |
| Servo Size | Standard |
Related Products:
These products have been hand curated by our R&D team. We have selected products that are directly compatible with or very relevant to the HS-5496MH Servo.
