Standard Servo Plate D

Similar in concept to the 575144 but turned sideways, this mount has a pattern plate rolled into an all-in-one package.  The servo cut-out will accept a standard size servo.  6-32 screws will be required to mount the servo of your choice.  In most instances, ¼" screws are the proper length.  Pan head screws provide adequate surface area under the head; if you prefer socket head screws we recommend adding washers under the heads to disperse the force on the plastic case of the servo.  Both of the repeated patterns are spaced 1.5" away from the spline of the servo so that you can create geartrains and motion assemblies with ease.